How To Edit 360 Radar Mlat Client
In the event you need to make changes to the 360 radar mlat client for example you change location then just follow these simple instructions below.
Firstly we need to login to the raspberry pi via terminal or putty and issue the command.
[cc lang="bash"]sudo nano /etc/default/lfw-mlat-client-rxX[/cc]
where X is the receiver number (1, 2, 3 or 4).
Make any changes you require and then save with Ctrl X, Y and Enter
Then restart MLAT with:
[cc lang="bash"]sudo service lfw-mlat-client-rxX restart[/cc]
again where X is 1,2,3 or 4
Credits to Philip Lee of 360radar.co.uk